How to Produce a pool in a polycarbonate greenhouse

The outside pool is a superb place to relax. Another drawback of an outdoor swimming pool is the rapid clogging with dust, dirt, leaves and other debris. Should you construct a pool in a greenhouse on your dacha, the skillet will be protected from the damaging impact of the natural environment, and also the bathing season can be extended till the start of frost.

Kinds of greenhouses for a Pool

Traditionally organize on a backyard plot pool in a freshwater greenhouse, but the definition of the type of construction is not limited to the selection of covering material. In the massive https://moyakovka.ru/ amount of evaporation inside the building is continually maintained high levels of humidity. Not every material will be suitable for the frame of the greenhouse. Wood will rot quickly, and black metal will be destroyed by corrosion.

The next important choice is your contour. Besides aesthetics, the rainwater for the pool has to have the ability to withstand wind loads and also a massive quantity of precipitation.

A lovely and durable pool at the greenhouse at the cabin will get the following forms:

  • Arch. Semicircular roof layout is not hard to make, as polycarbonate isn’t hard to bend. The arch is resistant to strong gusts of wind. Greenhouses of the form are built over round fonts. The plan isn’t simple to create and spends a lot of stuff.
  • One or two slopes. The simplest version of a greenhouse to get a font with flat walls is easy to erect. However, the polycarbonate structure is weakly stable, afraid of strong winds and heavy precipitation. A variant with one slope is not suitable for snowy regions.
  • Asymmetric form. Normally such greenhouses for swimming pools include a flat wall, passing into a big semicircle. The construction of polycarbonate is hard to make and demands proper positioning relative to the frequent wind direction.

Deciding on the form of a polycarbonate shelter depends on the size of this pool, as well as how many people are counted on the resting place.

  • Low. The polycarbonate construction is designed simply to protect the water out of clogging, acting as a cover. Over a little pool often put hinged tops, and massive fonts are equipped with a sliding system.
  • High. Looking at photographs of the pool in a polycarbonate greenhouse, you can confidently call the structure a real location of rest. Inside below a transparent dome have a folding furniture, plant decorative greenery, spend heating.

Covered with polycarbonate high greenhouses equipped with wide doors. Do doors make sliding, with the top lift or hinged.

  • Polycarbonate and metal profile for the frame are considered an environmentally friendly substance. No chemical odors will accumulate inside the greenhouse from heating the construction under sunlight.
  • Polycarbonate cover to the pool is durable and lightweight. If necessary it can be moved to another location.
  • Polycarbonate is resistant to harsh weather conditions.
  • Within the greenhouse that a greenhouse effect is created. It reduces the intensity of water flow from the pool, lessens the threat of reproduction of harmful microflora. The pool under the polycarbonate dome is protected from debris flushing.
  • Lightweight materials are convenient for self erection of the shield.
  • Polycarbonate pavilion has great light permeability. The material is inexpensive and can last up to ten decades.
  • The pool below the shelter will remain clean. No rust will crumble from the stainless profile, and dirty polycarbonate could be easily wiped off with a rag.

Of the disadvantages, there is 1 point. Polycarbonate is fearful of powerful mechanical consequences. To ensure that the shelter isn’t damaged by falling branches, the swimming pool isn’t put under trees.

Important: To pavilion to your pool for a very long time to function, to pay utilization polycarbonate sheets of thickness not less than 8 mm.

Selecting the type of fonts and setup methods

If we briefly think about how to make a pool in a greenhouse from polycarbonate, the job begins with the option of size. The fonts should be sufficient for many members of their family to visit in precisely the same moment. According to the sort of installation of the bowls are buried, partly embedded or set up on the surface. The latter kind may include a frame swimming at a greenhouse of polycarbonate or a tiny inflatable bowl. The most dependable is considered a totally buried font. In the dacha you can make a bowl under a dome of polycarbonate of 2 kinds:

A reinforced concrete ribbon is poured directly inside the pit. In the base of the pit, a pillow of sand with crushed stone is poured and a reinforcing mesh is laid. First, the bottom of the bowl has been poured in the mortar. After the concrete hardens, place the formwork to the pouring of the walls. The final bowl is coated with primer onto the outside and tiled, painted or otherwise finished indoors.

Bạn Đọc Bình Luận

Your email address will not be published. Required fields are marked *

Share